
This guide is mapped to “Flow” in Act 2 · Camilla. Compare the title, room colors, and main objects with the screenshot before following the sequence.
Last verified: · Verification method · Report a correction
50 Tiny Room Escape Level 19 walkthrough & guide
50 Tiny Room Escape Level 19, titled “Flow,” is a layered escape-room puzzle rather than a single lock. The decisive objective is to calibrate the machine and retrieve the code from the safe pool. The room is complete once you the access card completing the exit security pad.
50 Tiny Room Escape Level 19 quick answer: Oil the valve, use the wrench as the missing handle, open panels with the crowbar, set U1 80, U2 100, U3 40, U4 120, solve the bar and light boards, cool and depower the pool, then enter 3471 for the access card.
What you see at the start
A concrete pump room: a huge wall fan, an oval hatch door with a red wheel, a drained pool with wooden pallets, a wall of brass pipes with red valve wheels, a grey electrical box and a control console.
Step-by-step walkthrough
Survey the room
Take the oil applicator, wrench, and crowbar. Oil the rusty valve, use the wrench for the missing handle, and open the electrical and machine grilles.
Build the clue
Turn off the light, read the right-hatch calibration, and set U1 to 80, U2 to 100, U3 to 40, and U4 to 120 before pulling the lever.
Solve the mechanism
Set the first two column indicators to four bars, leave the third empty, and complete the machine's illuminated board pattern.
Release the final item
Retrieve the box from behind the stopped fan. Match the pipe valves to the machine diagram and cut electricity at the open panel to make the pool safe.
Open the exit
Take the note, enter 3471 on the box, insert the access card into the security pad, and complete its missing section to leave.
Video checkpoints
- 0:12 An oil can lies among the pallets; a pipe wrench and a crowbar follow.
- 0:42 The pipe wall has one rusted valve and one missing handle; the oil frees the first and the wrench stands in for the second.
- 1:00 The crowbar opens the grey electrical box, which holds switches and a fuse.
- 1:12 The console's lower panel is labelled “Locked” until the power is on.
- 1:24 A green peg board behind a grille needs yellow pegs placed in the lit pattern.
- 1:36 The console screen shows three tanks with arrow pairs; its four status lights turn green one by one as the boards are solved.
- 2:06 Four voltage dials (U1–U4) sit above the rules U1+U2+U3=220V, U1+U4=200V, U2+U3=140V and U3+U4=160V, which give U1 80, U2 100, U3 40 and U4 120.
- 2:36 With the dials set, the console display climbs to 340.
- 3:00 Once the fan stops, a briefcase is visible inside the fan duct.
- 3:48 A stained paper carries the faded digits for the briefcase; its four-wheel lock opens at 3471.
- 4:18 The access card goes into a reader that says “USE YOUR ACCESS CARD”, then a grid of circles is completed to light it green.
How the level ends
The oval hatch opens, and the results screen shows three card slots for Level 19.
How to know the solution worked
Do not reach for the submerged clue until both the heat and electricity are off; otherwise the code cannot be collected.
Important notes
- Calibration is 80-100-40-120.
- The third bar column stays empty.
- Turn off both heat and electricity.
- The box code is 3471.
Search and inventory tips
- 1Open all panels before calibrating.
- 2Pull the lever only after all four dials are exact.
- 3Do not confuse cooling valves with power controls.
- 4Keep the access card for the final pad.
Cards and optional secrets
Flow's optional cards are unrelated to the industrial calibration and 3471 box solution.
Compiled and edited by Level Clue from the sources linked above. Gameplay images and videos belong to their credited creators. How we check guides.
50 Tiny Room Escape Level 19: Oil the valve, use the wrench as the missing handle, open panels with the crowbar, set U1 80, U2 100, U3 40, U4 120, solve the bar and light boards, cool and depower the pool, then enter 3471 for the access card.
What this video segment shows
It shows the actual “Flow” room, the relevant close-up interactions, and the final exit.
The key sequence is to calibrate the machine and retrieve the code from the safe pool. The clip ends after you the access card completing the exit security pad.
Video checkpoints
- ROOMConfirm the title and layout
Match “Flow,” the wall colors, and the largest furniture before copying any code.
- ITEMSTrack required objects
- CLUEPause on digits or patterns
- EXITVerify the final state change
Quick feedback
Did this clue help you?
Your anonymous Yes or No helps us find walkthroughs that need another check.